Peaty's - Holdfast Trail Tool Wrap - Slate Grey

Peaty's - HoldFast Trail Tool Wrap - Slate Grey
Our HoldFast Trail Tool Wrap is the ultimate solution for flexibly carrying your tools on any bike, keeping them clean and quickly accessible in case of emergencies on the trail.
Conventional frame bags slip, scratch the frame, dirty the tool and are difficult to attach and remove. Our HoldFast Trail tool bag is made of extremely durable, completely waterproof fabric with welded seams that prevent your tools from getting covered in mud or dust on even the muddiest rides. There's also a fully sealed internal pocket to keep small items and valuables safe and dry.
Our unique attachment system separates the tool sheath from the harness, allowing the harness to be securely attached to the frame for the best possible fit. The tool sleeve then attaches separately to the fastening strap so your tools are quickly accessible when needed.
Once removed and unrolled, the tool cover can also be temporarily suspended from the bike by re-attaching it to the strap (which remains on the frame) so that all tools are quickly accessible.
Our flexible mounting system allows you to attach the strap anywhere on the bike without being restricted by bottle cages or accessory holders. This gives you the flexibility to decide what you want to take with you, with enough space for a spare inner tube and a case loaded with tools.
📝 KEY FEATURES
- No noise, no slipping
- Flexible transport of tools on any bike
- Waterproof material with durable welds to keep your tools clean
- Waterproof hidden zip pocket to keep items dry
- Modular design for use with or without spare tube
- Unique strap attachment to securely attach the tool wrap to the bike
- Reflective print for increased visibility
- Quick access to your tools in case of emergencies on the trail
- Available in Nightrider black, slate grey and moss green.
🎒 WHAT CAN IT HOLD?
Just as you wouldn't expect to pack the contents of a 30-litre rucksack into a 3-litre fanny pack, you need to be equally selective about what you carry in your HoldFast Tool Wrap. If you try different combinations, you will quickly find your ideal gear.
A typical combination of tools might be:
Main bag:
- 1x Holeshot Tubeless Repair Kit
- 1x Holeshot CO2 inflator
- 1x or 2x 25g CO2 cartridges (depending on the size of the multitool)
- 1x Multitool (the smaller the better)
- 2x tyre levers
Zipped pocket:
- Credit card, coins or banknotes
- Car or house key
- Cable tie
- Spare chain link
 

🛠️ ASSEMBLY INSTRUCTIONS
1. place your tools in the sleeve. Gently pull the bag together to tighten everything up and make it easier to roll up the sleeve.
2. roll up the sleeve tightly and check that it fits in the area of the frame where you want to mount it. We suggest mounting the bag under the top tube, but you may find a better place depending on frame size or suspension layout.
3. clean and dry the place where you want to mount the sheath.
4. take the strap, position the adhesive rubber patch on the frame and pull it through the buckle.
5. (Optional) If you want to carry a spare tube, place the folded tube between the strap and the frame.
6. pull the strap tight and then reattach it to itself so that the Velcro holds together. The strap (and the spare hose, if there is one) should now be securely attached to the frame. 7.
7. now take the tool strap and attach it to the lower end of the belt. 8.
8. pull the strap tightly around the shell and fasten the strap to itself to secure everything in place.
9. now you are ready to go!